Product Description
Power to Lock Fail-Safe Glass Door Magnetic glass sliding window lock
Product function:
| Model | NE-60 Magnetic cabinet locks |
| Holding Force | 60kg(100Lbs) |
| Rated Operating Voltage | 12VDC |
| Current consumption | 12V/100mA |
| Optional Functions | Lock Status Sensors,Relock Delay Timer,Buzzer |
| Surface finish for magnet | Zinc plated |
| Surface finish for armature plate | Zinc plated |
| Ambient temperature in °C | -10~+55ºC(14-131F) |
| Suitable for | Drawer, Door, Cabinet Door, Electronic Locker,File Cabinet ,Disply Cabinet,Furniture lock |
| Magnets Dimensions(L x W x D) | 80Lx33Wx19H(mm) |
| Armature Plate Dimensions(L x W x D) | 80Lx24Wx9.3H(mm) |
| Weight in kg | 0.5kg |
| CE-mark for building | Yes |
| Rohs-mark for building | Yes |
Packaging & Shipping
Packaging: Neutral Package.
Shipping: Small quantity within 1-5 work days after receipt of remittance, large quantity within 14 work days after receipt of remittance.
Our Services
For the non-human factors of product quality issues, NORDSON offer three-year warranty services for electromagnetic lock; three-year warranty for access control panel, electric bolt and electric strike; 1 year warranty for exit button, bracket, and power supply. The customers should take charge of the material and the maintain fees if the product damaged under other conditions.
Company information:
Nordson Electronic Co., Limited was founded in 2006, and now we are 1 of the most professional and comprehensive providers of access control solution in China.
Nordson’s products sell and be agent in more than 100 countries and regions, such as USA, EU, Middle East, Southeast Asia, Australia, Brazil, India,Russia etc. Besides, Nordson provides OEM and ODM services also. Nordson’s products are widely used in business institutions, government agencies,residential communities,universities,etc.
Products we could provide are below:
Electric Lock
Single Electromagnetic Lock Series,Double Electromagnetic Lock Series, Embedded Electromagnetic Lock Series,Brackets series for Electromagnetic lock,Electric Bolt Lock,Electric Cabinet Lock,Bracket for Electric Bolt Lock Series,Electric Strike, Mechanical lock series, Door Holder,Electric Control Lock,Door Loops
Biometric Solutions
Fingerprint Standalone Access Control Terminal,Network Fingerprint Access Control & Time Attendance Terminal,Face & Fingerprint Time Attendance Terminal, Fingerprint Sensor,Access Control Panel,Biometric Locks.
Guard Tour System Electric Locking Devices
Inductive Guard Tour System,Wireless Guard Tour System,Event Record Guard Tour System,Check Point Button and Staff RFID Tag,Guard Tour Management System Software.
Opening & Closing
Automatic Swing Door Opener System,Door Closer Series.
Release&Sensor&Power Supply
Exit Switch And Button,Power Supply for Access Control.
Access Card Reader
Card Reader,Card Issuer,HID series Access Control,2.4G Omnidirectional/Directional Active UHF RFID Card Reader.
RFID Card&Doorbell&Accessory
RFID Card,ABS Keyfob,HID RFID Card,Accessory of Access Control System.
Door contact
Surface Mounted Magnetic contacts,Overhead magnetic contacts,Recessed Mounted Magnetic contacts.
| Customized: | Customized |
|---|---|
| Certification: | RoHS, CCC, CE |
| Application: | Public Passage, Enterprise, Supermarket, Campus, Parking, Warehouse, Hotel, Company, Garage, Community |
| Working Principle: | Electronically Controlled Lock |
| Function: | Fail -Safe |
| Type: | Electromagnetic Lock |
| Samples: |
US$ 9.8/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Checking That Your Power Lock Actuator Is Still Working
Having a power lock in your car is very convenient, as you can easily lock or unlock the doors of your car. It also helps you to get your hands on the keys quickly, especially if you are a driver. However, it is important to check that the door lock actuator is still working properly. There are a number of signs that indicate that it is not working properly.
Body controllers dictate the locking and unlocking of the door lock mechanism
Using the best available power source, a pair of electronic circuitry is hardwired to actuate the door lock mechanism to unlock or lock the door. The aforementioned circuitry is wired to an actuator which in turn is connected by a rod to the top of the door. The power is transferred to the aforementioned actuator through a lock/unlock switch. The same apparatus controls the door occupants during vehicular entry.
There are numerous reasons to be concerned with the door lock mechanism of your automobile. For example, in the interest of a clean and safe operation, the locking mechanism is not always in use. Furthermore, the mechanism is susceptible to the vagaries of human error, especially when the driver in question has been at the wheel for some time. A system designed to prevent such mishaps is a worthwhile investment. This is especially true if the vehicle is equipped with the latest in technological advances. The key to ensuring the best possible outcome is to implement a system that is robust and scalable to a range of configurations.
An ideal system will include a power source, a small circuitry device, a small and nimble actuator and a robust power switch. The key to success is to have an intelligent power management strategy. This can be achieved through the use of sophisticated circuitry, which is a logical extension of the car’s powertrain. A small number of circuits is devoted to the task of locking and unlocking the doors and trunk of the car, while other circuits are dedicated to the task of controlling the contents of the rear compartment. This is the only way to ensure that your prized possessions will be safely contained. The most prudent course of action is to implement a system that is robust, yet user-friendly. Using a door lock assembly of this calibre is the best way to ensure that you get your money’s worth out of your investment. Having an automated system in place will also allow you to avoid the mishaps of the past.
Check for broken wires in the door lock actuator
Using a test light, you can check for broken wires in the door lock actuator. If the device is not working, the electrical connector may be faulty. If the connector is faulty, you may need to replace it.
There are several ways to test for a broken wire in the door lock actuator. You can use a test light, a power probe, or an automotive meter to check for voltage at the electrical connector. You can also use jumper wires to apply 12 volts to the actuator.
One of the most common reasons for a bad door lock system is a faulty wiring harness. This can affect the door controls and trigger an anti-theft alarm. For older vehicles, a relay may be used to power the actuator. If this is your problem, you can have a mechanic replace the wiring system.
If the door lock actuator is working properly, there is usually a visible fuse or relay. If you don’t see these, you may need to replace the control module. A faulty control module will cause your door to lock or unlock randomly.
A door lock actuator is a motor-based device that is located inside the door panel. It is used to unlock and lock your vehicle. It is built into the door latch assembly and is attached by screws or plastic clips. It can malfunction after a long period of use. It can also be visually damaged. It can also be the result of water seeping into the door.
If the door lock actuator is working properly, you should be able to unlock and lock your door with the handle. If it is not working, you may need to replace the actuator or the door handle. If you’re not comfortable repairing or replacing the door lock actuator yourself, you can have a mechanic do the job for you.
For a more comprehensive diagnosis, you can call an automotive specialist. An automotive technician can also replace the wiring system.
If you suspect a broken wire in the door lock actuator, you can test for voltage at the electrical connector. You can also test for a battery-powered voltage toggle.
Symptoms of a bad door lock actuator
Symptoms of a bad door lock actuator are easy to identify, and they can be easily fixed. Whether you are dealing with a door lock that randomly locks, a door lock that will not unlock, or an anti-theft alarm that is triggered, you can easily get rid of this problem.
First, you will need to diagnose the problem. The first thing to do is to look at the door system assembly. A malfunctioning lock system can cause weird noises when you try to open or close the doors. In addition, there may be other issues with the locking system.
Another common symptom is a clicking sound from the door. This indicates that the actuator is receiving power, but there is a grounding issue. This may be caused by debris or moisture leaking inside the door.
Next, check for a broken line. If you have an automotive meter, you can probe the door lock actuator to determine the problem. If you do not have an automotive meter, you can test the power by applying 12 volts to the actuator.
If you suspect that the door lock actuator is defective, you should consider replacing it. This may be the only solution to your problem. Depending on the type of car you drive, you may be able to replace the actuator yourself. However, if the car is older, it may be best to have a professional technician check it.
If you have a manual door lock, you may notice that the door will lock and unlock slightly. Alternatively, you may hear a loud noise coming from inside the door. This is a sign that the mechanical links inside the door lock actuator are damaged. Alternatively, you may believe that the linkage is faulty, but this is not the case.
If you are unsure of how to repair the door lock actuator, you may want to contact a car repair service or your car’s manufacturer. They should be able to provide specific instructions for your car.
If the actuator is causing the door to lock or unlock randomly, you should replace it immediately. It can cause a lot of problems.
Check for a blown fuse
Identifying a blown fuse is a quick and easy fix. If you aren’t sure what to look for, consult your owner’s manual. These manuals will contain a diagram showing where the fuse box is located and which circuits are assigned to each fuse.
Some cars also have additional fuses located under the hood. For cars with complex engineering systems, it is recommended to get a certified mechanic to inspect the fuse.
The fuse is a small piece of wire mounted inside a small ceramic tube. When a current rises above a certain level, the fuse will melt. A blown fuse is often caused by a short circuit. It can also be caused by faulty wiring or defective switches.
A blown fuse can affect your car’s door lock and power windows. It can also interfere with powertrain electronics and chassis electronics. Depending on your vehicle, the fuse can be located in the glove box, under the steering column, or under the hood.
A blown fuse can also cause problems with your car’s electric side mirrors and windshield wipers. If you notice a gap between the wire and the fuse, this is a sign that your fuse has blown.
Using a multimeter to check for a blown fuse is a simple and effective method of identifying a problem. To use a multimeter, connect the lead on one end of the fuse to the positive terminal on the multimeter and the other end of the fuse to the negative terminal.
The multimeter will then show the voltage and resistance of the fuse. If the fuse has a reading between 0 and 5 Ohms, it is a good fuse. If the fuse has a reading that is higher than 5 Ohms, it is a bad fuse.
Before testing the fuse, make sure you turn off the power source. If the fuse is blown, a current will flow through the fuse and cause damage to the wiring.
When you have identified a blown fuse, it is important to replace it with the same amperage fuse. If you do not know where to buy replacement fuses, it may be easier to get a fuse from a local auto parts store.
editor by CX 2023-05-15