Merchandise Description
Rechargeable or Battery Power Automatic Distant Control Parking Lock
Item |
distant control parking lock |
Dimensions |
460*490*430mm |
Up Height |
430mm |
Down Height |
60mm |
Net Weight |
eight.4kg |
Gross Weight |
8.9kg |
Remote Distance |
≤50m |
Up and Down |
5s to 6s |
Environment Temperature |
-thirty to +65 |
Feature |
Spraying plastic coating + gold oil,collision,waterproof |
Input voltage |
Input voltage |
Working Power |
DC6V 7AH |
Static Current (mA) |
≤0.85Ah |
Battery |
Lead Acid Battery |
Charge Time |
About six months on a charge |
Materials |
two.00mm steel rolling |
Outdoor Protection |
IP57 |
Certificate | CE/ROHS/FCC/SGS |
Product Description
one.Easy to Use
Use remote controller to lower and lay flat parking lock, then drive your vehicle into parking space
When leaving, press the remote controller button,your parking lock will automatically rise up and no 1 can
use your parking space.
two. Easy to Install
Fix parking lock onto the ground by expansion bolts is Okay.
3. Rechargeable Battery with Long Continuous Use
After being recharged, it will lasts for about 1000 hours or about 6 months continuous use.
four. Heavy Duty and Durable.
With high quality steel rolling,it can bear 5tons weight. It’s water-evidence, rust-proof and dust-proof and can last about 5 years in hard weather. Made of steel rolling,the sway arm won`t deform even be crushed by car.
five. Well Performance in Water and Dust.
With IP66 protection grade,it is water-proof and dust-proof and suitable for various parking environments.
6. Auto-reposition (Available for some models).
When vehicle hit the parking lock, the sway arm will be forced to close down with alarm sound,and once the vehicle left the sway arm,it will raise up instantly till vertical.With remoter, you can hold position of sway arm when it’s hit by vehicle.
seven. Anti-disconnecting for Power Safety.
The power connection is anti-disconnecting design in case the use misplace the battery causing short circuit.
8. Sounds-cost-free.
The transmission design on motor of no noise can make it good for battery and motorand also setting.
9. Manual control in case of no power.
In case the power is off, just manually control the parking lock in emergency.
ten.Alarm Against a Low Battery
If the battery is low, the parking lock will alarm to remind the owner to recharge the battery.
Apps:
one. Parking Lot.
two. Parking Equipment.
Far more variations
Application
Parking lot,Place of work buildings,Purchasing centers ,Residence Condominiums, Hospitals, Airports,Shops,Handicapped Parking…And anywhere need to deal with parking space
Firm Info:
JACKWIN is a specialist provider, specialized in building, creating, producing and exporting a broad range of roadway basic safety,parking,web site and construction facilities.We have a broad selection of merchandise that we self-designed with outstanding top quality for clients’ choice and the powerful capability for injection and blowing moulding process in our R&D section can make plastic items in different dimensions, shapes and hues with outstanding strength in brief guide-time with decrease building and production expense to satisfy customers from allover the planet.
Our organization can source OEM and ODM services for consumers all more than the globe, welcome to pay a visit to our website and inquire for catalogue and value at any time.
our providers:
1. 5 a long time warranty policy
2. We take a look at all the merchandise 3 times prior to supply.
three. We will reply you for your inquiry in 24 several hours.
four. great supply time
five. manufacturing facility immediate sale
6.guarantee samples quality very same as mass productions quality
seven.tailored productions are welcomed
eight.keep tricks to your concepts and style
cargo&payments:
Payment Phrases
T/T, L/C,Western Union, Paypal, MoneyGram 30% deposits 70% stability just before shipping and delivery or towards copy of BL.
Shipping
1. FedEx/DHL/UPS/TNT for samples, Door-to-Doorway
two. By Air or by Sea for batch products, for FCL OR LCL Airport/ Port obtaining
three. Customers specifying freight forwarders or negotiable shipping and delivery techniques.
4. Shipping Time: about 10 days for samples about thirty days for batch goods.
/ Piece | |
50 Pieces (Min. Order) |
###
Type: | Car Position Locks |
---|---|
Falling Prevention Device: | Pull-Type |
Certification: | CE, CCC |
Lift Mode: | Combination |
Voltage: | DC 12V |
Color: | Black and Yellow |
###
Samples: |
US$ 85/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
Product |
remote control parking lock |
Size |
460*490*430mm |
Up Height |
430mm |
Down Height |
60mm |
Net Weight |
8.4kg |
Gross Weight |
8.9kg |
Remote Distance |
≤50m |
Up and Down |
5s to 6s |
Environment Temperature |
-30 to +65 |
Feature |
Spraying plastic coating + gold oil,collision,waterproof |
Input voltage |
Input voltage |
Working Power |
DC6V 7AH |
Static Current (mA) |
≤0.85Ah |
Battery |
Lead Acid Battery |
Charge Time |
About six months on a charge |
Material |
2.00mm steel rolling |
Outdoor Protection |
IP57 |
Certificate | CE/ROHS/FCC/SGS |
/ Piece | |
50 Pieces (Min. Order) |
###
Type: | Car Position Locks |
---|---|
Falling Prevention Device: | Pull-Type |
Certification: | CE, CCC |
Lift Mode: | Combination |
Voltage: | DC 12V |
Color: | Black and Yellow |
###
Samples: |
US$ 85/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
---|
###
Product |
remote control parking lock |
Size |
460*490*430mm |
Up Height |
430mm |
Down Height |
60mm |
Net Weight |
8.4kg |
Gross Weight |
8.9kg |
Remote Distance |
≤50m |
Up and Down |
5s to 6s |
Environment Temperature |
-30 to +65 |
Feature |
Spraying plastic coating + gold oil,collision,waterproof |
Input voltage |
Input voltage |
Working Power |
DC6V 7AH |
Static Current (mA) |
≤0.85Ah |
Battery |
Lead Acid Battery |
Charge Time |
About six months on a charge |
Material |
2.00mm steel rolling |
Outdoor Protection |
IP57 |
Certificate | CE/ROHS/FCC/SGS |
Symptoms of a Bad Actuator in Power Locks
Having a power lock in your vehicle is a great way to keep your doors locked while you’re driving. A power lock allows you to lock your doors from the front or the driver’s seat. The front passenger can also lock their doors from the power lock.
Common uses for power locks
Almost every car model has a power door lock as an option. They can be used to secure high priority areas and to provide an additional layer of security. These locks can be set up to unlock or lock automatically at certain times of the day.
They are also great for business settings, where they can ensure automatic locking after business hours. They can also send virtual keys to guests. This allows them to unlock the doors without having to physically come into the building.
The most common material used to make locks is stainless steel. This material offers excellent corrosion resistance. It also provides great durability. Stainless steel locks are available in a variety of grades, including austenitic grades, which are non-magnetic.
There are also magnetic locks. These are used with access control systems and biometric systems. They are activated by proximity devices, and are used in places where security is a high priority. Magnetic locks are easy to install and can withstand up to 1200 pounds of force.
These are the most common types of power locks. These locks are installed in residential and commercial settings. They may be subject to state and federal regulations, depending on where they are used. They are also used in storage rooms and other high traffic areas.
These locks can be configured for multiple users. These locks are ideal for businesses that want to ensure that only authorized users can open the doors. They are also great for businesses that want to ensure that doors are secured during business hours.
These locks are a great way to increase security in high traffic areas. They are easy to install and require less maintenance than electric strikes. They are also more affordable to purchase than magnetic security locks.
Signs that something is wrong
Unless you’re the proud owner of a power lock, you’re probably not as lucky as a powerless slumdog or two. The good news is that you can remedy your plight with a battery powered power pack and an open mind. Using the aforementioned power pack will allow you to get your power on without compromising your security. The best part is that the power pack will be fully charged by the time you return from your evening stroll.
The most difficult part of this task is making sure that your prized possession isn’t stolen by a ne’er-bee. To avoid such a mishap, it may be prudent to install a security system such as a monitored door lock. Besides, the power packed power pack can also act as a shield from unseen intruders. With a power packed power pack on hand, the worst that can happen is that you can be locked out of your own home. That’s a good reason to do your research. Fortunately, your power packed power pack can also act as your best friend. After all, who has the time to deal with a burglar? Having a properly installed power pack can save you the embarrassment of a lockout. Having the right power pack on hand is a great start, but you may want to do some homework before you go to bed. A properly installed power pack should be the foundation of any security system. After all, your home is one of the most valuable things in your possession and you should treat it with the same level of respect as you would treat your dog or children. For a small fee, a reputable security service provider can help you maintain a home that you can be proud of.
Symptoms of a bad actuator
Symptoms of a bad actuator in power locks are not always visible. This is because there are many factors that can cause them to malfunction. A faulty actuator will not only cause the door to lock, but it will also lock and unlock in an unpredictably random manner.
The best way to find out if your power locks are malfunctioning is to first check the power to your actuator. This will not require too much effort. You can either connect a jumper wire or use a power probe to apply 12 volts to the actuator.
If you don’t have access to a power probe, you can use a small screwdriver to turn the lock handle up and down. You can also use a coat hanger to unlock the door.
The most obvious symptom of a bad actuator in power locks is the ability to lock or unlock the doors of your car. However, there are other signs as well. For instance, you may notice that the interior lights stay on when the doors are closed. This is a sign of a broken wiring harness.
If you have a car with more than two wires, you should consult your car’s wiring diagram. If your car’s locking system is malfunctioning, you should try a replacement door lock actuator.
Other symptoms of a bad actuator in power locks include strange noises when the door is opened. This can also be a sign of a broken door panel connection. This is not necessarily a problem, but it is a good idea to check it out before replacing your entire door lock assembly.
If your car is a newer model, you may need to disassemble the door lock assembly to access the actuator. If you’re not comfortable with that, you can always hire a third party mechanic to do the job.
Diagnosing a bad actuator
Getting a bad actuator for your power lock can cause your doors to lock or unlock randomly. Symptoms include the door lock working perfectly one day, then not working at all the next. You may also hear weird noises when the door lock is operated.
The first thing you need to do is check the power supply to the actuator. This can be done by using a Power Probe. The Power Probe has jumper wires that can be used to apply 12 volts to the actuator.
Once you have a good power supply, you can remove the actuator. Most actuators can be removed with your hands. Before removing the actuator, make sure that it is mounted properly and that it does not bind.
If you are still having trouble, you may have to replace the whole latch assembly. This is a fairly simple and inexpensive process. If you are unsure of how to do this, you may want to call a mechanic. They will be able to help you diagnose your power lock.
If you have a door lock that makes a clicking sound, you may have a bad actuator. If the clicking sound is not consistent, you may have a problem with the door lock switch. You can try to replace the fuse. If that doesn’t work, you may have a broken connection between the door panel and the actuator. You can also try to remove the door panel and check the solenoid coils.
A broken or dirty lock assembly can also cause the door to lock or unlock erratically. If the lock has a problem with its sensor, the car may stop locking and unlocking at certain speeds.
Repairing a bad actuator
Having a problem with your power lock actuator can be a real hassle. You may hear strange sounds or see your car’s doors lock or unlock erratically. This type of problem can be caused by a number of factors.
First, a good diagnostic test can help you determine if the issue is with your power lock actuator or a related component. The first thing to check is the voltage polarity at the electrical connector. This can be done with a test light or automotive meter.
Another way to test the voltage polarity is to disconnect the electrical connector. This will allow you to take the actuator and lock assembly off. If your door locks are working properly, you will see a positive reading on both sides of the connector. If you see a negative reading on one side, this is an indication that the actuator is not working.
If you don’t have a test light or automotive meter, you can use jumper wires to apply 12 volts to the actuator. You may have to remove your outer door handle to access the wires.
If your door locks are not working, you may need to replace the door lock actuator. It is recommended that you replace the actuator once or twice in your car’s lifetime. This will make your vehicle easier to use and more convenient.
Identifying the problem is the first step in the repair process. If you are unable to find the problem, you may need to replace the entire lock assembly. Some cars may also require the window regulator to be removed.
Once you have determined the problem, you can either troubleshoot your power lock system or replace the entire latch assembly. This will be expensive, however.
editor by CX 2023-04-07